Single  Plug Conventional Type 305 Series Single  XH (Extra High) Assembly 307 Series  Double Plug Conventional Type 306 Series Double XH (Extra High) Assembly 308 Series 311 Series Pin Assembly Short & Long Pin Assembly 313 Series Pin Assembly Conventional & Extra High Pressure Circulating Head Fast Latch Assembly Quick Couplings Conventional & Extra High Pressure Test Table

Single Conventional Type

This Conventional Design is our most Popular Cementing Head.

The Conventional Type is fabricated using ACME Seal type port connections.  This Design eliminates line-pipe connections that were used in the past.

The working pressures for these heads are as follows: 5000 P.S.I. through 9 5/8", 3000 P.S.I. through 13 3/8", and 1500 P.S.I. through 20".

Conventional Cement Heads can be configured to meet your needs!

3 Types of Manifolds
1) Econo- NPT-(Line Pipe) Featuring DR-50 Valves
2) - Integral Connection Featuring DR-50 Valves
3) - Fully Integral Featuring DR-150 Valves

2 Types of Tattle Tales
1) Mechanical Type- Side Port Connection w/sensing arm
2) Wire-Line - Cap Assembly Connection  

Also, Extra Pump Connection is available for High Volume Pumping and Quick Coupling with Standard and Premium casing Threads. The complete assembly is machined, using alloy steel, to ASME and API specifications.

Industrial Rubber’s Conventional Cementing Heads
are available in sizes 2 3/8" thru 20".

This Double Extra Pressure design is manufactured by IRI with your high pressure needs in mind.

All connections to the head are integral type with Acme threads. A Tattle Tale assembly signals the Cementing Plug has left the head. The interior of the head is machined with an oversize bore to allow equalization of pressure around the cementing plug.  The plug is held in place during cementing by a continuous type Pin Assembly. A Quick Coupling allows easy connection to the casing while being suspended by a Lifting Assembly .

The Manifold is FMC's DR15OW Plug Valves and 1502 Weco Unions.

The complete assembly is machined using alloy steel with traceability of each component and to ASME and API specifications.
 

(Downloadable PDF)